Follow us on Facebook and Instagram for information on new products, Links can be found at the bottom of the page.
for information on new products
Gear lever heat shrink wrap. Improve the looks of your gear lever by simply heat shrinking this product around your shaft.
The shrink wrap is available in many colours and is supplied in 200mm length, it is suitable for shafts with a diameter of 8-12mm diameter.
If you buy multiple lengths of the same product it will come as one continuous length.
will fit gear lever shafts of 8-12mm in diameter. supplied in 200mm length.
- Place a piece of masking tape on the gear lever just below the knob
-Remove the Gear knob and measure the distance from the tape and the top of the gear lever, then remove the tape
-Remove the gaiter or push down as far as possible
-Slip the gear lever shrink tube over the gear stick
-Using a heat gun evenly heat the shrink tube until it shrinks to tightly cover the gear stick. care must be taken not to damage other components, parts or yourself with the heat gun.
-Using the measurement taken at the start of the process trim the shrink wrap to allow knob fitment
- Replace the gaiter and re attach the gear knob.